No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Interworking with a Non-Huawei Device

(Optional) Configuring Interworking with a Non-Huawei Device

Context

If a non-Huawei device connected to the Huawei device uses the integer mode to save the bandwidth of FRR objects, configure the Huawei device to save the bandwidth of FRR objects in integer mode.

Perform the following operations on the PLR connected to the non-Huawei device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls

    The MPLS view is displayed.

  3. Run mpls rsvp-te fast-reroute-bandwidth compatible

    The device is configured to save the bandwidth of FRR objects in integer mode.

    By default, the bandwidth of FRR objects is saved in the float point mode.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 20473

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next