No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for MPLS LDP

Default Settings for MPLS LDP

Table 3-7  Default settings for MPLS LDP

Parameter

Default Setting

Global MPLS capability

Disabled

Global MPLS LDP capability

Disabled

Link-Hello send timer

5 seconds

Link-Hello hold timer

15 seconds

Target-Hello send timer

15 seconds

Target-Hello hold timer

45 seconds

Keepalive send timer

15 seconds

Keepalive hold timer

45 seconds

Exponential backoff timer

Initial value: 15 seconds; maximum value: 120 seconds

Longest-match

Disabled

Global BFD capability

Disabled

Synchronization Between LDP and Open Shortest Path First (OSPF)

Disabled

Synchronization Between LDP and Intermediate System to Intermediate System (IS-IS)

Disabled

LDP GR

Disabled

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 24070

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next