No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R013C00

This document describes the configurations of MPLS, including Static LSP, MPLS LDP, MPLS QoS, MPLS TE, MPLS OAM, Seamless MPLS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Mapping of the Precedence in the Public MPLS Tunnel Label

Configuring the Mapping of the Precedence in the Public MPLS Tunnel Label

To implement the QoS function on an MPLS network, the switch needs to determine the packet precedence according to the tunnel label on the MPLS public network. Therefore, it is necessary to map the tunnel label to the EXP field.

Pre-configuration Tasks

Before configuring the mapping of the precedence in the tunnel label, complete the following tasks:

  • Configure a local LDP session. For details, see Configuring Basic Functions of MPLS LDP.

  • Create a DiffServ domain. For details, see Priority Mapping Configuration in the S7700 and S9700 V200R013C00 Configuration Guide - QoS.

Configuration Procedure

Configure the mapping of the precedence in the tunnel label in the following sequence.

Updated: 2019-04-08

Document ID: EDOC1100065745

Views: 26049

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next