No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Device to Send BFD for PW Packets

Enabling the Device to Send BFD for PW Packets

Context

By default, the device does not send BFD for PW packets to the protocol layer for processing. You can enable the device to send BFD for PW packets to the protocol layer so that these packets are not discarded or forwarded.

Perform the following operations on the two PEs of the PW.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd for pw enable

    The device is enabled to send BFD for PW packets to the protocol layer.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 37997

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next