No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the Traffic Statistics

Clearing the Traffic Statistics

Context

The traffic statistics information cannot be restored after you clear it. So, confirm the action before you use the command.

Procedure

  • Run the reset traffic-statistics vsi all command in the user view to reset all traffic statistics on VPLS PW.
  • Run the reset traffic-statistics vsi name vsi-name command in the user view to reset traffic statistics on all VPLS PWs in a specified VSI.
  • Run the reset traffic-statistics vsi name vsi-name peer peer-address command in the user view to reset traffic statistics on a VPLS PW in a specified VSI.
  • Run the reset traffic-statistics vsi name vsi-name peer peer-address negotiation-vc-id vc-id command in the user view to reset the traffic statistics on a specified Martini VPLS PW in a specified VSI.
  • Run the reset traffic-statistics vsi name vsi-name peer peer-address remote-site site-id command in the user view to reset the traffic statistics on a specified Kompella VPLS PW in a specified VSI.
  • Run the reset traffic-statistics vsi name vsi-name peer peer-address ldp129 command in the user view to reset the traffic statistics on a specified BGP AD VPLS PW in a specified VSI.
  • Run the reset counters interface vlanif [ interface-number ] command in the user view to reset the traffic statistics on the specified VLANIF interface bound to the VSI.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33680

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next