No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for BGP/MPLS IPv6 VPN

Default Settings for BGP/MPLS IPv6 VPN

Table 4-2 lists the default settings for BGP/MPLS IPv6 VPN functions.

Table 4-2  Default settings for BGP/MPLS IPv6 VPN


Default Setting

BGP/MPLS IPv6 VPN feature


Alarm function for BGP/MPLS IPv6 VPN events


Number of local AS number repetitions (applicable to Hub and Spoke networking)


Label allocation mode on PE devices

Label per instance

Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 39332

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next