No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP GR for MP-BGP

Configuring BGP GR for MP-BGP

Context

When MP-BGP restarts, the VPNv6 peer relationship is re-established and traffic forwarding is interrupted. After BGP GR is enabled, traffic interruption can be avoided. Configure BGP GR for MP-BGP on all the PEs (including the PE that serves as the ASBR) and the RRs that reflect the VPNv4 route, unless BGP GR has been configured for MP-BGP when BGP GR is configured between PEs and CEs.

Procedure

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 34336

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next