No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling MPLS L2VPN Alarm Verification

Disabling MPLS L2VPN Alarm Verification

Context

If MPLS L2VPN alarm verification is enabled on a device, the device regularly sends service alarms to the fault management (FM) module until these alarms are cleared. The FM then compares received alarms with locally stored alarms. If a received alarm is different from any of the locally stored alarms, the FM module reports the alarm to the NMS. If a received alarm is the same as a locally stored alarm, the FM module does not report this alarm.

If a large number of services exist, MPLS L2VPN alarm verification may regularly drive the CPU usage to a high level, affecting service performance. In this case, you can disable MPLS L2VPN alarm verification.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the mpls l2vpn command to enter the MPLS L2VPN view.
  3. Run the mpls l2vpn alarm verification disable command to disable MPLS L2VPN alarm verification.

    By default, MPLS L2VPN alarm verification is enabled.

    After MPLS L2VPN alarm verification is disabled, the device does not periodically send service alarms to the FM module, and the FM module cannot age out cleared alarms.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33061

Downloads: 50

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next