No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VPLS Application in Individual Services

VPLS Application in Individual Services

Service Overview

Individual services such as high speed Internet (HSI), voice over IP (VoIP), and broadband TV (BTV) are usually carried over carriers' metropolitan area networks (MANs).

Broadband Remote Access Servers (BRASs) or Service Routers (SRs) are deployed at the egress of the MAN as individual service gateways. Layer 2 packets from a user need to be transparently transmitted to a service gateway using VPLS or VLL technology. User information will be lost if Layer 2 packets are terminated on a PE and forwarded using Layer 3 routing. The service gateway fails to control the user because it does not have the user information. When the primary and secondary service gateways are deployed on the MAN, user traffic needs to be dual-homed to the access service gateways. VPLS technology must be used to achieve this goal.

Networking Description

Individual services are transmitted to the Internet over the access layer, convergence layer, and core layer of a MAN. Figure 7-25 shows a typical example implementation for individual services.

  • HSI services access the Internet over the MAN.

  • VoIP services request IP addresses from the Dynamic Host Configuration Protocol (DHCP) server over the MAN.

  • BTV multicast members apply for BTV services from multicast sources over the MAN.

Figure 7-25  Implementation for individual services

Feature Deployment

VPLS is configured on PEs to transparently transmit traffic between them. Figure 7-25 uses LDP VPLS as an example to show VPLS configuration:

  • Access-layer devices

    VLANs are configured to differentiate different types of users.

    PPPoE over AAL5 (PPPoEoA) and PPP over AAL5 (PPPoA) are configured to allow access of HSI users through dialup.

    Multicast VLAN and IGMP snooping are configured to transmit multicast services.

  • Aggregation-layer devices

    Interior Gateway Protocols (IGPs) are configured on PEs so that they can communicate with each other.

    Basic MPLS functions are configured on PEs so that these PEs can establish remote LDP sessions.

    MPLS L2VPN and VSIs are configured on PEs.

    A VPLS daisy chain is deployed on PEs to transmit multicast services.

  • Core-layer devices

    Authentication and accounting features are configured on BRASs so that they can terminate HSI services.

    IGPs are configured on SRs so that they can communicate with each other.

    Basic MPLS functions are configured on SRs.

    DHCP relay is configured on SRs, allowing VoIP users to obtain IP addresses from DHCP servers.

    Layer 3 multicast features are configured on SRs so that these SRs can communicate with multicast sources.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33683

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next