No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Alarm Report Function

Configuring the Alarm Report Function

Context

You can configure the alarm report function, which helps you obtain the real-time running status of the VLL network and facilitates operations and maintenance.

Procedure

  • Configure alarm report for the CCC VLL.
    1. Run system-view

      The system view is displayed.

    2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwcccvcdown | hwcccvcup }

      Alarm report for the CCC VLL is enabled.

      By default, alarm report for the CCC VLL is disabled.

  • Configure alarm report for the Martini VLL.
    1. Run system-view

      The system view is displayed.

    2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwpwvcbackup | hwpwvcdeleted | hwpwvcdown | hwpwvcstatuschange | hwpwvcswitchptow | hwpwvcswitchwtop | hwpwvcup }

      Alarm report for the Martini VLL is enabled.

      By default, alarm report for the Martini VLL is disabled.

  • Configure alarm report for the SVC VLL.
    1. Run system-view

      The system view is displayed.

    2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwsvcdeleted | hwsvcdown | hwsvcswitchptow | hwsvcswitchwtop | hwsvcup }

      Alarm report for the SVC VLL is enabled.

      By default, alarm report for the SVC VLL is disabled.

  • Configure alarm report for the Kompella VLL.
    1. Run system-view

      The system view is displayed.

    2. Run snmp-agent trap enable feature-name l2vpn trap-name { hwkompellaswitchptow | hwkompellaswitchwtop | hwkompellavcdown | hwkompellavcup }

      Alarm report for the Kompella VLL is enabled.

      By default, alarm report for the Kompella VLL is disabled.

Verifying the Configuration

After completing the alarm report for a VLL, you can run the following command to check whether alarm report is enabled.

  • Run the display snmp-agent trap feature-name l2vpn all command to check whether alarm report is enabled for the L2VPN module.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33724

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next