No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of VPLS Convergence When the UPE Directly Connects to the SPE

Verifying the Configuration of VPLS Convergence When the UPE Directly Connects to the SPE

Prerequisites

All VPLS convergence configurations are complete.

Procedure

  • Run the display admin-vsi binding [ admin-vsi vsi-name ] command to check the binding relationships between the mVSI and the service VSI.
  • Run the display bfd configuration { { all | static } for-vsi-pw | vsi-pw vsi vsi-name peer peer-address [ vc-id vc-id ] } [ verbose ] command to check the BFD configuration on BFD for VSI PW.
  • Run the display bfd session { all | static } for-vsi-pw [ verbose ] command to check BFD sessions on BFD for VSI PW.
  • Run the display bfd statistics session{ all | static } for-vsi-pw command to check BFD statistics on BFD for VSI PW.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 35097

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next