No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VPNv6 GR

Configuring VPNv6 GR

Pre-configuration Tasks

Before configuring VPNv6 GR, complete the following task:

Configuration Procedure

The configuration of VPNv6 GR includes the following:
  • Configure IGP GR, BGP GR, and MPLS LDP GR on the PEs.
  • Configure IGP GR and MPLS LDP GR on the P.
  • Enable IGP GR or BGP GR on the CEs.
  • Enable IGP GR, BGP GR, and MPLS LDP GR on the ASBRs when inter-AS is configured.
NOTE:

GR cannot ensure uninterrupted traffic when the local and neighboring devices perform active/standby switchovers simultaneously.

Perform the following tasks to complete the VPNv6 GR configuration.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 32631

Downloads: 50

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next