No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting BGP TCP Connections of a VLL

Resetting BGP TCP Connections of a VLL


If the BGP L2VPN application and other applications share the same TCP connection, the reset bgp l2vpn command resets the BGP neighbor relationship of all applications on this TCP connection. Confirm your action before using the command.

After the parameters configured in the BGP L2VPN address family view are modified, you can run the reset bgp l2vpn command to reset the TCP connection of the BGP L2VPN. After that, the BGP negotiates parameters, sends label information, and establishes a session again.


  • Run the reset bgp l2vpn { as-number | peer-ip-address | all | internal | external } command in the user view to reset BGP L2VPN TCP connections.
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 39760

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next