No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring User Access to the Public Network or L3VPN

Configuring User Access to the Public Network or L3VPN

Context

The configuration of the L3VE interface for connecting users to the public network or MPLS L3VPN varies with the networking environment. Perform the following steps based on actual needs.

Procedure

  • Configuring a user to access the public network
    1. Run system-view

      The system view is displayed.

    2. Run interface virtual-ethernet ve-number.subnumber

      The L3VE sub-interface view is displayed.

    3. Run dot1q termination vid vlan-id

      Or run qinq termination pe-vid pe-vid ce-vid ce-vid

      A VLAN ID is configured for the L3VE sub-interface.

    4. Run ip address ip-address { mask | mask-length }

      An IP address is configured for the L3VE sub-interface.

  • Configuring a user to access the MPLS L3VPN network
    1. Run system-view

      The system view is displayed.

    2. Run interface virtual-ethernet ve-number.subnumber

      The L3VE sub-interface view is displayed.

    3. Run dot1q termination vid vlan-id

      Or run qinq termination pe-vid pe-vid ce-vid ce-vid

      A VLAN ID is configured for the L3VE sub-interface.

    4. Run ip binding vpn-instance vpn-instance-name

      The L3VE sub-interface is associated with a VPN instance.

    5. Run ip address ip-address { mask | mask-length }

      An IP address is configured for the L3VE sub-interface. The IP address is a private network address of the MPLS L3VPN.

Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 39070

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next