Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for PWE3
- Example for Configuring a Dynamic Single-hop PW
- Example for Configuring a Static Multi-hop PW
- Example for Configuring a Dynamic Multi-hop PW
- Example for Configuring a Mixed Multi-hop PW
- Example for Configuring Static BFD for PWs
- Example for Configuring Dynamic BFD for a Single-hop PW
- Example for Configuring Dynamic BFD for a Multi-hop PW
- Example for Configuring Inter-AS PWE3-Option A
- Example for Configuring PWE3 FRR-CEs Are Asymmetrically Connected
to PEs
- Example for Configuring PW Redundancy in a Scenario Where CEs
Are Asymmetrically Connected to PEs
Previous
