No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of VLL

Monitoring the Running Status of VLL

Context

This section describes how to monitor the VLL running status by viewing the VLL connection information.

Run the following commands in any view to check the running status of VLL.

Procedure

  • Run the display vll ccc [ ccc-name | type { local | remote } ] command to check information about the CCC connection.
  • Run the display mpls static-l2vc [ interface interface-type interface-number ] command to check information about the SVC VLL connection.
  • Run the display mpls l2vc [ vc-id | interface interface-type interface-number ] command to check information about the local Martini VLL connection on the PE.
  • Run the display bgp l2vpn { all | group [ group-name ] | peer [ [ peer-ip-address ] verbose ] | route-distinguisher route-distinguisher [ ce-id ce-id [ label-offset label-offset ] ] } command to check BGP information about the Kompella VLL.
  • Run the display mpls l2vpn connection [ vpn-name [ remote-ce ce-id | down | up | verbose ] | summary | interface interface-type interface-number ] command to check information about the Kompella VLL.
  • Run the display mpls l2vpn label-space command to check information about label space distribution and different types of labels in the label cache.
  • Run the display mpls l2vpn vpws [ interface interface-type interface-number [ verbose ] ] command to check information about VPWS service.
  • Run the display mpls label-stack vll interface interface-type interface-number command to check the information about label stacks in VLL networking.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 34968

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next