No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transmitting Multi-Protocol Local Network Data Through a GRE Tunnel

Transmitting Multi-Protocol Local Network Data Through a GRE Tunnel

In Figure 1-4, subnets located in different areas, need to communicate through the public IP network. Term1 and Term2 are the local networks running IPv6. Term3 and Term4 are local networks running the IP protocol.

Figure 1-4  Transmitting multi-protocol local network data through a GRE tunnel

Switch_1 and Switch_2 set up a GRE tunnel through which Term1 can communicate with Term2 without affecting communication between Term3 and Term4.

Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33813

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next