No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting Traffic Statistics on a VLL

Resetting Traffic Statistics on a VLL


The traffic statistics information cannot be restored after you clear it. So, confirm the action before you use the command.

To reset traffic statistics on a VLL, run the following commands in the user view on the device.


  • Run the reset traffic-statistics l2vpn interface interface-type interface-number command in the user view to clear VLL traffic statistics on the specified interface.
  • Run the reset counters interface vlanif [ interface-number ] command in the user view to clear traffic statistics on the VLANIF interface bound to the specified VLL.
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 39094

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next