No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Static VLLs to Access a VPLS Network

Configuring Static VLLs to Access a VPLS Network

Pre-configuration Task

Before configuring static VLLs to access a VPLS network, complete the following tasks:
  • Configure the IGP on Ps and SPEs on the MPLS backbone network to implement IP connectivity.

  • Implement the connectivity between SPEs on the VPLS fully-connected network.

  • Enable MPLS L2VPN on the interfaces connecting UPEs and SPEs.


When VPN services need to be transmitted over a specified TE tunnel or when load balancing needs to be performed among multiple tunnels to fully use network resources, tunnel policies need to be applied to VPNs.

Configuration Procedure

To configure static VLLs to access a VPLS network, configure the UPE and SPE.
  • Configuring the UPE

    1. Configuring static LSPs between UPEs and SPEs
    2. Configuring a UPE to access an SPE through a static VLL
  • Configuring the SPE

    1. Configuring static LSPs between UPEs and SPEs
    2. Binding a static VLL to a VSI on an SPE
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 33764

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next