No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S7700 and S9700 V200R013C00

This document describes the configurations of VPN, including GRE, IPSec, BGP/MPLS IP VPN, BGP/MPLS IPv6 VPN, VLL, PWE3, VPLS, L2VPN Access to L3VPN.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the VPNv6 GR Configuration

Verifying the VPNv6 GR Configuration

Prerequisites

The configurations of the VPNv6 GR function are complete.

Procedure

  • Run the display ospf brief command to check the status of OSPF GR.
  • Run the display isis graceful-restart status [ level-1 | level-2 ] [ process-id | vpn-instance vpn-instance-name ] command to check the status of IS-IS GR on the backbone network or the status of GR of IS-IS instance between a PE and a CE.
  • Run the display ospfv3 [ process-id ] graceful-restart-information command to check the status of GR of OSPFv3 instance between a PE and a CE.
  • Run the display bgp vpnv6 all peer verbose command to check the status of the BGP GR.
Translation
Download
Updated: 2019-04-08

Document ID: EDOC1100065751

Views: 35118

Downloads: 50

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next