No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MGMD

MGMD

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.4 hwMgmdGmpJoin

Description

MGMD/2/JOINGRP:OID [oid] Interface receives an IGMP or MLD Join message. (Interface=[string], InterfaceIndex=[integer], Version=[gauge], SrcStr=[string], GrpStr=[string], HostAddr=[string], InstanceName=[string])

IGMPv1, IGMPv2, or MLDv1 Report messages were received.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.4

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Interface

Indicates the name of the interface that receives the IGMP/MLD Report message.

InterfaceIndex

Indicates the index of the interface that receives the IGMP/MLD Report message.

Version

Indicates the version of the Report message.
  • 1: IGMPv1/MLDv1
  • 2: IGMPv2/MLDv2

SrcStr

Indicates the source address of the IGMP/MLD Report message.

GrpStr

Indicates the group address of the IGMP/MLD Report message.

HostAddr

Indicates the IP address of the host that sends the IGMP/MLD Report message.

InstanceName

Indicates the instance name.

Impact on the System

Services will not be affected.

Possible Causes

The function of generating a trap was enabled when an IGMP/MLD Report/Leave message was received. This trap is generated when an IGMPv1, IGMPv2, or MLDv1 Report message was received.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.5 hwMgmdGmpLeave

Description

MGMD/2/LEAVEGRP:OID [oid] Interface receives an IGMP or MLD Leave message or corresponding group timer on this interface expires. (Interface=[string], InterfaceIndex=[integer], SrcStr=[string], GrpStr=[string], InstanceName=[string])

The member of the IGMP or MLD group on the interface left.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.5

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Interface

Indicates the name of the interface that receives a Leave or Done message.

InterfaceIndex

Indicates the index of the interface that receives an IGMP Leave message or an MLD Done message.

SrcStr

Indicates the source address of the IGMP Leave message or the MLD Done message.

GrpStr

Indicates the group address of the IGMP Leave message or the MLD Done message.

InstanceName

Indicates the instance name.

Impact on the System

Services will not be affected.

Possible Causes

  • An IGMPv1 group membership expired.
  • An IGMPv2 or MLDv1 group membership expired, or a Leave/Done message was received.
  • An IGMPv3 or MLDv2 SSM-mapping group membership expired, or a Leave/Done message was received.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.6 hwMgmdGMPGlobalLimit

Description

MGMD/3/INSTLIMIT:OID [oid] Membership report message is discarded because the global IGMP or MLD group membership limitation is exceeded in this instance. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], LimitCnt=[integer], InstanceName=[string])

New members failed to join the IGMP or MLD group because the number of global IGMP or MLD entries in a single instance reached the limit.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.6

Minor

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Indicates the source address of the Report message.

GrpAddr

Indicates the group address of the Report message.

LimitCnt

Indicates the limit of global IGMP or MLD entries in the current instance.

InstanceName

Indicates the instance name.

Impact on the System

After the number of global entries of a single instance reaches the limit, new members fail to join the IGMP or MLD group, and corresponding entries cannot be established. In this case, terminal users cannot receive the desired on-demand video programs.

Possible Causes

After the limit to the number of global IGMP or MLD entries in a single instance was set on the switch, when the number of global IGMP or MLD entries reached the limit, new members failed to join the IGMP or MLD group and the corresponding trap was generated.

Global IGMP or MLD entries include the (*,G) entries, (S,G) entries, and entries in the SSM-mapping table in the current instance.

Procedure

  1. Run the display igmp [ vpn-instance vpn-instance-name ] group verbose command or the display mld group verbose command to check whether the statistical number of IGMP or MLD entries is equal to or greater than the limit value in the current instance.

    • If so, go to Step 2.

    • If not, go to Step 4.

  2. Check the network status and judge whether more IGMP or MLD entries can be maintained in the current instance in the network.

    • If so, go to Step 3.

    • If not, go to Step 5. This situation indicates that multicast services in the network are saturated and therefore no more IGMP or MLD entries can be added. It is recommended to reduce multicast services or deploy a higher-performance device as an alternative to the current device.

  3. Run the limit number command in the IGMP view or the limit number command in the MLD view to increase the limit value of the IGMP or MLD entries in the current instance. Then, check whether the trap persists.

    • If so, go to Step 1.

    • If not, go to Step 5.

  4. Collect alarm information and configuration information, and then contact technical support personnel.
  5. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.7 hwMgmdGMPInterfaceLimit

Description

MGMD/3/IFLIMIT:OID [oid] Membership report message is discarded because the interface-specific IGMP or MLD group membership limitation is exceeded. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], Interface=[integer], LimitCnt=[integer], InterfaceName=[string], InstanceName=[string])

New members failed to join the IGMP or MLD group of an interface because the number of IGMP or MLD entries of the interface reached the limit.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.7

Minor

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Indicates the source address of the Report message.

GrpAddr

Indicates the group address of the Report message.

Interface

Indicates the index of the current interface.

LimitCnt

Indicates the number of entries on the current interface.

InterfaceName

Indicates the name of the interface.

InstanceName

Indicates the instance name.

Impact on the System

After the number of entries of an interface reaches the limit, new members fail to join the interface-specific IGMP or MLD group, and corresponding entries cannot be established. Users in the shared network segment connected to the interface board where the current interface resides cannot receive the desired on-demand video programs.

Possible Causes

After the limit to the number of IGMP or MLD entries was set on an interface, when the number of interface-specific IGMP or MLD entries reached the limit, new members failed to join the IGMP or MLD group and the corresponding trap was generated.

Interface-specific IGMP or MLD entries include the (*,G) entries, (S,G) entries, and entries in the SSM-mapping table on the interface.

Procedure

  1. Run the display igmp group interface interface-type interface-number verbose command or the display mld group interface interface-type interface-number verbose command to check whether the statistical number of IGMP or MLD entries on the interface is equal to or greater than the limit value.

    • If so, go to Step 2.

    • If not, go to Step 4.

  2. Check the network status and judge whether more IGMP or MLD entries can be maintained on the interface of the network.

    • If so, go to Step 3.

    • If not, go to Step 5. This situation indicates that multicast services in the network are saturated and therefore no more IGMP or MLD entries can be added. It is recommended to reduce multicast services or deploy a higher-performance device as an alternative to the current device.

  3. Run the igmp limit number command or the mld limit number command in the interface view to increase the limit value of interface-specific IGMP or MLD entries. Then, check whether the trap persists.

    • If so, go to Step 1.

    • If not, go to Step 5.

  4. Collect alarm information and configuration information, and then contact technical support personnel.
  5. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.8 hwMgmdGMPTotalLimit

Description

MGMD/3/GLBLIMIT:OID [oid] Membership report message is discarded because the total IGMP or MLD group membership limitation is exceeded in all instances. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], LimitCnt=[integer])

New members failed to join the IGMP or MLD group because the total number of IGMP or MLD entries in all instances reached the limit.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.8

Minor

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Indicates the source address of the Report message.

GrpAddr

Indicates the group address of the Report message.

LimitCnt

Indicates the limit of IGMP or MLD entries in all instances.

Impact on the System

After the total number of entries in all instances reaches the limit, new members fail to join the IGMP or MLD group, and corresponding entries cannot be established. In this case, terminal users cannot receive the desired on-demand video programs.

Possible Causes

After the limit to the total number of IGMP or MLD entries in all instances was set on the switch, when the total number of IGMP or MLD entries reached the limit, new members failed to join the IGMP or MLD group and the corresponding trap was generated.

Global IGMP or MLD entries include the (*,G) entries, (S,G) entries, and entries in the SSM-mapping table in all instances.

Procedure

  1. Run the display igmp all-instance group verbose and display current-configuration commands , or the display mld group verbose and display current-configuration commands to check whether the statistical number of IGMP or MLD entries in all instances is equal to or greater than the limit value that is set by the igmp global limit command or the mld global limit command.

    • If so, go to Step 2.

    • If not, go to Step 4.

  2. Check the network status and judge whether more IGMP or MLD entries can be maintained on the switch of the network.

    • If so, go to Step 3.

    • If not, go to Step 5. This situation indicates that multicast services in the network are saturated and therefore no more IGMP or MLD entries can be added. It is recommended to reduce multicast services or deploy a higher-performance device as an alternative to the current device.

  3. Run the igmp global limit number command or the mld global limit command in the system view to increase the limit value of the IGMP or MLD entries in all instances. Then, check whether the trap persists.

    • If so, go to Step 1.

    • If not, go to Step 5.

  4. Collect alarm information and configuration information, and then contact technical support personnel.
  5. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.9 hwMgmdGMPInterfaceLimitClear

Description

MGMD/3/IFLIMITCLR:OID [oid] The new Report message can be processed because the number of IGMP or MLD group memberships on the interface falls below the upper limit. (GroupAddressType=[integer],SrcAddr=[binary], GrpAddr=[binary], Interface=[integer], LimitCnt=[integer], InterfaceName=[string], InstanceName=[string])

The number of IGMP or MLD group memberships on the interface fell below the upper limit and new members can join the group.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.9

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Indicates the source address.

GrpAddr

Indicates the group address.

Interface

Indicates the index value of the interface.

LimitCnt

Indicates the number of IGMP or MLD entries on the interface.

InterfaceName

Indicates the interface name.

InstanceName

Indicates the instance name.

Impact on the System

None

Possible Causes

Some IGMP or MLD group records were deleted from the interface and the number of entries fell below the upper limit.

Procedure

  1. This alarm message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.10 hwMgmdGMPGlobalLimitClear

Description

MGMD/3/hwmgmdgmpgloballimitclear:OID [oid] The new report message can be processed because the number of IGMP or MLD group memberships in this instance falls below the upper limit. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], LimitCnt=[integer], InstanceName=[string])

The number of global Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) entries for the groups in an instance fell below the upper threshold, and new hosts can join the groups.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.10

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Source address contained in a Report message

GrpAddr

Group address contained in a Report message

LimitCnt

Upper threshold for the number of IGMP or MLD entries in an instance

InstanceName

Name of the instance

Impact on the System

None.

Possible Causes

The number of global IGMP or MLD entries for the groups in an instance fell below the upper threshold.

Procedure

  1. This alarm is informational only, and no action is required.

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.11 hwMgmdGMPTotalLimitClear

Description

MGMD/3/hwmgmdgmptotallimitclear:OID [oid] The new report message can be processed because the total IGMP or MLD group memberships in all instances falls below the upper limit. (GroupAddressType=[integer], SrcAddr=[binary], GrpAddr=[binary], LimitCnt=[integer])

The number of Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) entries for the groups in all instances fell below the upper threshold, and new hosts can join the groups.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.11

Minor

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

GroupAddressType

Indicates the inetAddressType of group address. The value can be:
  • 1: IPv4 address

  • 2: IPv6 address

SrcAddr

Source address contained in a Report message

GrpAddr

Group address contained in a Report message

LimitCnt

Upper threshold for the number of IGMP or MLD entries in all instances

Impact on the System

None.

Possible Causes

The number of IGMP or MLD entries for the groups in all instances fell below the upper threshold.

Procedure

  1. This alarm is informational only, and no action is required.

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.12 hwMgmdTotalLimitThresholdExceed

Description

MGMD/3/hwMgmdTotalLimitThresholdExceed:OID [oid] IGMP or MLD total entries count in all instances reached the upper threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdTotalLimitCurrentCount=[integer], hwMgmdTotalLimitThreshold=[integer]%, hwMgmdTotalEntries=[integer])

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed reached the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.12

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address (IGMP)

  • 2: IPv6 address (MLD)

hwMgmdTotalLimitCurrentCount

Number of global IGMP/MLD entries created

hwMgmdTotalLimitThreshold

Alarm threshold for global IGMP/MLD entries

hwMgmdTotalEntries

Maximum number of global IGMP/MLD entries allowed

Impact on the System

If you continue to configure multicast services after this alarm is reported, new multicast services may fail to be provisioned due to the lack of IGMP/MLD entry resources.

Possible Causes

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed reached the upper alarm threshold.

Procedure

  1. Check whether the upper alarm threshold is too low in the configuration file.

    • If the threshold is too low, go to Step 2.

    • If the threshold is not low, go to Step 3.

  2. Run the mgmd total-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
  3. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  4. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.13 hwMgmdTotalLimitThresholdExceedClear

Description

MGMD/3/hwMgmdTotalLimitThresholdExceedClear:OID [oid] IGMP or MLD total entries count in all instances fell below the lower threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdTotalLimitCurrentCount=[integer], hwMgmdTotalLimitThreshold=[integer]%, hwMgmdTotalEntries=[integer])

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed fell below the lower alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.13

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address (IGMP)

  • 2: IPv6 address (MLD)

hwMgmdTotalLimitCurrentCount

Number of global IGMP/MLD entries created

hwMgmdTotalLimitThreshold

Alarm threshold for global IGMP/MLD entries

hwMgmdTotalEntries

Maximum number of global IGMP/MLD entries allowed

Impact on the System

Services will not be affected.

Possible Causes

The proportion of global IGMP/MLD entries created to the maximum global IGMP/MLD entries allowed fell below the lower alarm threshold.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.14 hwMgmdHostStarGThresholdExceed

Description

MGMD/3/hwMgmdHostStarGThresholdExceed:OID [oid] IGMP or MLD total (*, G) entries on the host side of all instances count reached the upper threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdHostStarGCurrentCount=[integer], hwMgmdHostStarGThreshold=[integer]%, hwMgmdHostStarGTotalCount=[integer])

The total number of (*, G) entries of all instances reached the specified upper alarm threshold on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.14

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address (IGMP)

  • 2: IPv6 address (MLD)

hwMgmdHostStarGCurrentCount

Number of existing (*, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdHostStarGThreshold

Upper and lower alarm thresholds for the (*, G) entry usage of all instances on the user-side IGMP/MLD device

hwMgmdHostStarGTotalCount

Maximum limit of total number of (*, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

The number of (*, G) entries is about to reach the maximum number allowed, after which new (*, G) entries cannot be created.

Possible Causes

The total number of (*, G) entries of all instances reached the specified upper alarm threshold on the user-side IGMP/MLD device.

Procedure

  1. Check whether the upper alarm threshold is too low in the configuration file.

    • If the threshold is too low, go to Step 2.

    • If the threshold is not low, go to Step 3.

  2. Run the mgmd host star-group-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
  3. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  4. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.15 hwMgmdHostStarGThresholdExceedClear

Description

MGMD/3/hwMgmdHostStarGThresholdExceedClear:OID [oid] IGMP or MLD total (*, G) entries on the host side of all instances count fell below the lower threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdHostStarGCurrentCount=[integer], hwMgmdHostStarGThreshold=[integer]%, hwMgmdHostStarGTotalCount=[integer])

The (*, G) entry usage of all instances fell below the specified lower alarm threshold on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.15

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address (IGMP)

  • 2: IPv6 address (MLD)

hwMgmdHostStarGCurrentCount

Number of existing (*, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdHostStarGThreshold

Upper and lower alarm thresholds for the (*, G) entry usage of all instances on the user-side IGMP/MLD device

hwMgmdHostStarGTotalCount

Maximum limit of total number of (*, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

Services will not be affected.

Possible Causes

The (*, G) entry usage of all instances fell below the specified lower alarm threshold on the user-side IGMP/MLD device.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.16 hwMgmdHostStarGExceed

Description

MGMD/3/hwMgmdHostStarGExceed:OID [oid] IGMP or MLD total (*, G) entries on the host side cannot be created because the limit is reached. (hwMgmdNotificationAddressType=[integer], hwMgmdHostNotificationSrcAddr=[binary], hwMgmdHostNotificationGrpAddr=[binary], hwMgmdHostStarGCurrentCount=[integer], hwMgmdInstanceName=[string])

The total number of (*, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.16

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostNotificationSrcAddr

Source address

hwMgmdHostNotificationGrpAddr

Group address

hwMgmdHostStarGTotalCount

Maximum limit of total number of (*, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdInstanceName

Name of the VPN instance

Impact on the System

New (*, G) entries cannot be created, because the total number of (*, G) entries of all instances has exceeded the maximum number allowed on the user-side IGMP/MLD device.

Possible Causes

The total number of (*, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  2. If the IGMP or MLD (*, G) entries of an address family and instance indicated in the alarm information are not needed, delete them to reduce the number of (*, G) entries.
  3. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.17 hwMgmdHostStarGExceedClear

Description

MGMD/3/hwMgmdHostStarGExceedClear:OID [oid] IGMP or MLD total (*, G) entries can be created because the number of IGMP or MLD total (*, G) entries on the host side fell below the limit. (hwMgmdNotificationAddressType=[integer], hwMgmdHostStarGTotalCount=[integer])

The total number of (*, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device, so new (*, G) entries can be created.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.17

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostStarGTotalCount

Maximum limit of total number of (*, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

Services will not be affected.

Possible Causes

The total number of (*, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.18 hwMgmdHostSGThresholdExceed

Description

MGMD/3/hwMgmdHostSGThresholdExceed:OID [oid] IGMP or MLD total (S, G) entries on the host side of all instances count reached the upper threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdHostSGCurrentCount=[integer], hwMgmdHostSGThreshold=[integer]%, hwMgmdHostSGTotalCount=[integer])

The total number of (S, G) entries of all instances reached the specified upper alarm threshold on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.18

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostSGCurrentCount

Number of existing (S, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdHostSGThreshold

Upper and lower alarm thresholds for the (S, G) entry usage of all instances on the user-side IGMP/MLD device

hwMgmdHostSGTotalCount

Maximum limit of total number of (S, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

The number of (S, G) entries is about to reach the maximum number allowed, after which new (S, G) entries cannot be created.

Possible Causes

The total number of (S, G) entries of all instances reached the specified upper alarm threshold on the user-side IGMP/MLD device.

Procedure

  1. Check whether the upper alarm threshold is too low in the configuration file.

    • If the threshold is too low, go to Step 2.

    • If the threshold is not low, go to Step 3.

  2. Run the mgmd host source-group-number threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value command in the multicast MIB view to set the upper alarm threshold to a larger value.
  3. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  4. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.19 hwMgmdHostSGThresholdExceedClear

Description

MGMD/3/hwMgmdHostSGThresholdExceedClear:OID [oid] IGMP or MLD total (S, G) entries on the host side of all instances count fell below the lower threshold. (hwMgmdNotificationAddressType=[integer], hwMgmdHostSGCurrentCount=[integer], hwMgmdHostSGThreshold=[integer]%, hwMgmdHostSGTotalCount=[integer])

The (S, G) entry usage of all instances fell below the specified lower alarm threshold on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.19

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostSGCurrentCount

Number of existing (S, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdHostSGThreshold

Upper and lower alarm thresholds for the (S, G) entry usage of all instances on the user-side IGMP/MLD device

hwMgmdHostSGTotalCount

Maximum limit of total number of (S, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

Services will not be affected.

Possible Causes

The (S, G) entry usage of all instances fell below the specified lower alarm threshold on the user-side IGMP/MLD device.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.20 hwMgmdHostSGExceed

Description

MGMD/3/hwMgmdHostSGExceed:OID [oid] IGMP or MLD total (S, G) entries on the host side cannot be created because the limit is reached. (hwMgmdNotificationAddressType=[integer], hwMgmdHostNotificationSrcAddr=[binary], hwMgmdHostNotificationGroup=[], hwMgmdHostSGCurrentCount=[], hwMgmdInstanceName=[string])

The total number of (S, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.20

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostNotificationSrcAddr

Source address

hwMgmdHostNotificationGrpAddr

Group address

hwMgmdHostSGTotalCount

Maximum limit of total number of (S, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdInstanceName

Name of the VPN instance

Impact on the System

New (S, G) entries cannot be created, because the total number of (S, G) entries of all instances has exceeded the maximum number allowed on the user-side IGMP/MLD device.

Possible Causes

The total number of (S, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  2. If the IGMP or MLD (S, G) entries of an address family and instance indicated in the alarm information are not needed, delete them to reduce the number of (S, G) entries.
  3. End.

Related Information

None

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.21 hwMgmdHostSGExceedClear

Description

MGMD/3/hwMgmdHostSGExceedClear:OID [oid] IGMP or MLD total (S, G) entries can be created because the number of IGMP or MLD total (S, G) entries on the host side fell below the limit. (hwMgmdNotificationAddressType=[integer], hwMgmdHostSGTotalCount=[integer])

The total number of (S, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device, so new (S, G) entries can be created.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.21

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostSGTotalCount

Maximum limit of total number of (S, G) entries of all instances on the user-side IGMP/MLD device

Impact on the System

Services will not be affected.

Possible Causes

The total number of (S, G) entries of all instances fell below the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. This message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 4196

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next