No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MAD

MAD

MAD_1.3.6.1.4.1.2011.5.25.246.1.1 hwMadConflictDetect

Description

MAD/4/MULTIACTIVEDETECTED: OID [oid] Multi-active scenario is detected.

A multi-active scenario was detected.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.246.1.1 Warning equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

Two switches with the same IP address, MAC address, and global configuration are working properly. As a result, an address conflict occurs.

Possible Causes

The CSS link was faulty.

Procedure

  1. Run the display device command to check whether the CSS splits.

    (1) If so, go to step 2.

    (2) If not, go to step 3.

  2. Check whether the CSS cable is loose. If so, reconnect it securely. If the indicator of the CSS port still does not turn green, replace the cable. If the alarm is not cleared after the cable is replaced, go to step 4.
  3. Check whether the alarm is cleared. If so, no action is required.
  4. Collect alarm information and configuration information, and then contact technical support personnel.

MAD_1.3.6.1.4.1.2011.5.25.246.1.2 hwMadConflictResume

Description

MAD/4/MULTIACTIVEMERGE: OID [oid] Multi-active scenario is merged.

The multi-active fault was rectified.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.246.1.2 Warning equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

None

Possible Causes

The multi-active fault was rectified.

Procedure

  • No action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 4243

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next