No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FTPS

FTPS

FTPS_1.3.6.1.4.1.2011.5.25.166.2.1 hwFtpNumThreshold

Description

FTPS/4/FTPUSEREXCEED:OID [oid] The number of FTP users exceeded the upper threshold. (Upper threshold = [ULONG])

The number of FTP users exceeded the upper limit.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.166.2.1 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
Upper threshold Upper limit of the number of FTP users

Impact on the System

The CPU usage will increase.

Possible Causes

The number of IPv4 or IPv6 FTP users exceeds the upper limit of the number of FTP users.

Procedure

  1. Run the display ftp-users command to check whether the number of login FTP users exceeds the upper threshold.

    • If the number of login FTP users exceeds the upper threshold, go to step 2.

    • If the number of login FTP users does not exceed the upper threshold, go to step 3.

  2. Reduce the number of login FTP users.
  3. End.

FTPS_1.3.6.1.4.1.2011.5.25.166.2.2 hwFtpNumThresholdResume

Description

FTPS/4/FTPUSERRESUME:OID [oid] The number of FTP users fell below the lower threshold. (Lower threshold = [ULONG])

The number of FTP users fell below the upper limit.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.166.2.2 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
Lower threshold Upper limit of the number of FTP users

Impact on the System

None

Possible Causes

The number of FTP users fell below the upper limit.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 5062

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next