No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP

SNMP

SNMP_1.3.6.1.4.1.2011.5.25.164.3.1 hwSNMPLockThreshold

Description

SNMP/4/HWSNMPTHRESHOLD:OID [oid] The number of unauthorized users reached the upper threshold of the lock queue. (FallingThreshold=[INTEGER], RaisingThreshold=[INTEGER])

The number of users who were locked due to an authentication failure reached the upper threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.164.3.1 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

FallingThreshold

Lower threshold for the number of users who were locked due to an authentication failure

RaisingThreshold

Upper threshold for the number of users who were locked due to an authentication failure

Impact on the System

The device which were accessed by users that were failed to be authenticated may fail to be connected to an NMS.

Possible Causes

The device was accessed using incorrect community names, users names, or authentication passwords.

Procedure

  1. Check whether locked unauthorized users have attack source information. If they have attack source information, filter out the information using a firewall.

Related Information

None.

SNMP_1.3.6.1.4.1.2011.5.25.164.3.2 hwSNMPLockThresholdResume

Description

SNMP/4/HWSNMPTHRESHOLDRESUME:OID [oid] The number of unauthorized users fell back to the lower threshold of the lock queue. (FallingThreshold=[INTEGER], RaisingThreshold=[INTEGER])

The number of users who were locked due to an authentication failure fell below the lower threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.164.3.2 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

FallingThreshold

Lower threshold for the number of users who were locked due to an authentication failure

RaisingThreshold

Upper threshold for the number of users who were locked due to an authentication failure

Impact on the System

The system will not be affected.

Possible Causes

The number of locked users fell below the lower threshold.

Procedure

  1. The alarm is informational only, and no action is required.

Related Information

None

SNMP_1.3.6.1.6.3.1.1.5.1 coldStart

Description

SNMP/4/COLDSTART:OID [oid] coldStart.

The device was cold started.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.6.3.1.1.5.1 Warning equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

The alarm, generated because of the device cold start, brings no adverse impact on the system.

Possible Causes

The device was cold started.

Procedure

  • This trap message is informational only, and no action is required.

Related Information

None.

SNMP_1.3.6.1.6.3.1.1.5.2 warmStart

Description

SNMP/4/WARMSTART:OID [oid] warmStart.

The device was hot started, or the SNMP agent was enabled.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.6.3.1.1.5.2 Warning equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

The alarm, generated because of the device warm start, brings no adverse impact on the system.

Possible Causes

  • The device was hot started.
  • The SNMP agent was enabled.

Procedure

  • This trap message is informational only, and no action is required.

Related Information

None.

SNMP_1.3.6.1.6.3.1.1.5.5 authenticationFailure

Description

SNMP/4/AUTHFAIL:OID [oid] authenticationFailure. (RemoteIpAddressType=[INTEGER], RemoteIpAddress=[STRING])

The authentication of SNMP failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.6.3.1.1.5.5

Warning

other(1)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

RemoteIpAddressType

Indicates the IP address type of the remote peer

RemoteIpAddress

Indicates the IP address of the remote peer

Impact on the System

The system will not be affected.

Possible Causes

  • The incorrect community name was used to connect devices.

  • The incorrect user name of SNMPv3 was used to connect devices.

Procedure

  1. Run the display current-configuration | include snmp-agent command in the user view to check whether community or SNMPv3 user name configurations are correct.

    • If so, go to Step 3.

    • If not, go to Step 2.

  2. To modify the community, run the snmp-agent community command in the system view. To create a correct user, run the snmp-agent usm-user command in the system view. Then, check whether the alarm is cleared.

    • If so, go to Step 4.
    • If not, go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 3494

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next