No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
GTL

GTL

GTL_1.3.6.1.4.1.2011.5.25.142.2.1 hwGtlDefaultValue

Description

GTL/2/DEFAULTVALUE:OID [OID] Current license value is default, the reason is [reason].

The system used the default configuration of the GTL license, when a license file became invalid.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.1 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

reason

Indicates the cause for default authorization.

Impact on the System

  1. Restricted function items in the license will become unavailable.

  2. The thresholds of the resource items in the license will be set the default values.

NOTE:
If the GTL License file is invalid, the trap will be reported each time the device restarts or a master/slave main control board switchover is performed.

Possible Causes

The authentication of the license file failed.

Procedure

  1. Confirm whether the license file exists. If not, activate a valid license file.
  2. Confirm whether the license file is valid. If not, replace it with a valid license file.
  3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.7 hwGtlDefaultValueCleared

Description

GTL/2/GTL_DEFAULTVALUE_CLEARED:OID [OID] The alarm indicating that the system will use the default value if license verification fails was cleared. (Reason=[Reason])

The alarm indicating that the GTL license values were default settings was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.7 Major equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

Reason

Indicates the cause for default authorization.

Impact on the System

Services will not be affected.

Possible Causes

A license file was loaded.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.2 hwGtlResourceUsedUp

Description

GTL/2/RESOURCE_USEDUP:OID [OID] Resource item [item-name] is nearly used up.

The trap was generated when the percentage of the resources used by the service module was not less than the 90% which is defined by the license.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.2 Major environmentalAlarm(6)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

item-name

Indicates the name of the resource item.

Impact on the System

Under the control of the license, the usage percentage of service resources cannot exceed the threshold defined by the license. Therefore, if a larger license file cannot be applied for or activated, traffic loads cannot cater for the demand of the current operation scenario.

NOTE:
This trap is reported only once when the percentage of resources used by the service module reaches or exceeds 90% of the threshold defined by the license.

Possible Causes

The usage percentage of service resources reached or exceeded the threshold defined by the license.

Procedure

  1. Confirm whether the current license file is large enough. If not, apply for a larger license file.
  2. Use the new license file and run the license active license-name command to activate it.
  3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.10 hwGtlResourceUsedUpCleared

Description

GTL/2/GTL_NEARUSEDUP_CLEAR: OID [OID] The alarm indicating that resources item [item-name] are nearly exhausted was cleared.

The alarm indicating that the resources available for the service module are running out was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.10 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

item-name

Indicates the name of the resource item.

Impact on the System

Services will not be affected.

Possible Causes

The resource usage falls below the threshold.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.3 hwGtlNearDeadline

Description

GTL/2/NEARDEADLINE:OID [OID] License feature [item-name] is near deadline, remain time is [date] days.

The trap was generated when the system date was approaching the deadline of the service module defined in the license, that is, when the license entered the trial status.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.3 Major other

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

item-name

Indicates the name of the resource item.

date

Indicates the number of remaining days.

Impact on the System

If the new license file is not applied for and activated before the probation period of the existing license file expires, the function items subject to the license will become unavailable and resource items will run as a smaller default value.

NOTE:
This trap is reported once a day within the trial period.

Possible Causes

The license was approaching the deadline and soon would become invalid.

Procedure

  1. This trap indicates that the current license file nearly reaches the deadline, and you should apply for the new license file before the deadline.
  2. Use the new license file and run the license active license-name command to activate it.
  3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.8 hwGtlNearDeadlineCleared

Description

GTL/2/GTL_NEARDEADLINE_CLEARED:OID [OID] The alarm indicating that the feature is about to expire was cleared. (FeatureName=[FeatureName])

The alarm indicating that the license was about to expire was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.8 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

FeatureName

Indicates the name of the resource item.

Impact on the System

Services will not be affected.

Possible Causes

Cause 1: A valid license file has been loaded, and the license that was about to expire restored to the normal state.

Cause 2: The original license file became invalid.

Procedure

  • Cause 1: This alarm message is informational only, and no action is required.
  • Cause 2: Apply for a new valid license file and use the new license file. Run the license active license-name command to activate the license file.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.20 hwGtlEsnMismatch

Description

GTL/2/GTL_ESN_MISMATCH:OID [OID] The ESN of slot [slot] mismatched with the license file.

The slot ESN mismatched the GTL license ESN.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.20 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

slot

ID of the slot

Impact on the System

The GTL license enters the trial period. If a new GTL license is not applied for and activated before the trial period expires, the function items subject to the license will become unavailable and resource items will run under default settings.

Possible Causes

The GTL license ESN mismatched the slot ESN.

Procedure

  1. Run the license revoke command to obtain the revoke ticket of the GTL license.
  2. Run the display esn command to collect the ESN information.
  3. Apply for a new GTL license by using the revoke ticket and ESN.
  4. Run the license active license-name command to activate the new GTL license.
  5. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.21 hwGtlEsnMismatchCleared

Description

GTL/2/GTL_ESN_MISMATCH_CLEARED:OID [OID] The alarm indicating that the ESN of slot [slot] mismatched with the license file was cleared.

The alarm indicating the mismatch between the slot ESN and GTL license ESN was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.21 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

slot

ID of the slot

Impact on the System

The system will not be affected.

Possible Causes

A new license was obtained and activated. The slot ESN and GTL license ESN matched again.

Procedure

  • This trap message is informational only, and no action is required.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.22 hwGtlItemInactive

Description

GTL/2/GTL_ITEM_INACTIVE:OID [OID] Item [item-name] is inactive.

The service module to be controlled by the GTL file was not included in the file but the associated service was successfully configured.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.22 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

item-name

Service module name

Impact on the System

Services controlled by the GTL file will fail.

Possible Causes

The service module to be controlled by the GTL file was not included in the file

Procedure

  1. Apply for an associated GTL file.
  2. Run the license active license-name command to activate the GTL file.
  3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

GTL_1.3.6.1.4.1.2011.5.25.142.2.23 hwGtlItemInactiveCleared

Description

GTL/2/GTL_ITEM_INACTIVE_CLEARED:OID [OID] The alarm indicating that item [item-name] is inactive was cleared.

The trap generated when the GTL file involving the current service module was inactive was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.142.2.23 Major other(1)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

item-name

Service module name

Impact on the System

The system will not be affected.

Possible Causes

A GTL file involving the current service module was obtained and activated.

Procedure

  • This log message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 3807

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next