No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
USBLOAD

USBLOAD

NOTE:

Only the devices that support USB-based deployment support this alarm.

USBLOAD_1.3.6.1.4.1.2011.5.25.129.2.1.9 hwEntityInvalid

Description

USBLOAD/4/UsbPlugIn: OID [oid] u-disk plug in. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalContainedIn=[INTEGER], EntPhysicalName=[OCTET], RelativeResource=[OCTET], ReasonDescription=[OCTET])

The USB flash drive is inserted into the device.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.9 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.
EntityPhysicalIndex Entity index.
BaseTrapSeverity Severity code.
BaseTrapProbableCause Error code.
BaseTrapEventType Code of the event type.
EntPhysicalContainedIn Entity code.
EntPhysicalName Entity name.
RelativeResource Name of the affected component.
ReasonDescription Fault description.

Impact on the System

After the USB flash drive is inserted into the device, the USB-based deployment process is started if the USB-based deployment conditions are met.

Possible Causes

The USB flash drive is inserted into the device.

Procedure

  1. No action is required.

USBLOAD_1.3.6.1.4.1.2011.5.25.129.2.1.10 hwEntityResume

Description

USBLOAD/4/UsbPlugOut: OID [oid] u-disk plug out. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalContainedIn=[INTEGER], EntPhysicalName=[OCTET], RelativeResource=[OCTET], ReasonDescription=[OCTET])

The USB flash drive is removed from the device.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.10 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.
EntityPhysicalIndex Entity index.
BaseTrapSeverity Severity code.
BaseTrapProbableCause Error code.
BaseTrapEventType Code of the event type.
EntPhysicalContainedIn Entity code.
EntPhysicalName Entity name.
RelativeResource Name of the affected component.
ReasonDescription Fault description.

Impact on the System

If the USB-based deployment is complete, the normal USB-based deployment process ends. If the USB-based deployment is being performed, the deployment fails.

Possible Causes

The USB flash drive is removed from the device.

Procedure

  1. No action is required. To start the USB-based deployment process again, insert the USB flash drive into the device.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 3510

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next