No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TPLMNG

TPLMNG

TPLMNG_1.3.6.1.4.1.2011.5.25.327.31.5.2.1 hwTplmCmdExecuteFailedNotify

Description

TPLMNG/3/CMDEXECUTEFAIL: OID [oid] AS [STRING] failed to execute the command, the reason is [STRING].

The AS failed to execute the command in the delivered profile.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.327.31.5.2.1 Minor qualityOfServiceAlarm(3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
STRING Indicates the AS name.
STRING Indicates the cause of the fault.

Impact on the System

The service configuration does not take effect because the command execution fails.

Possible Causes

The AS failed to execute the command due to an unknown exception.

Procedure

  1. Run the commit as { name as-name | all } command to redeliver the configuration.

TPLMNG_1.3.6.1.4.1.2011.5.25.327.31.5.2.2 hwTplmCmdExecuteSuccessfulNotify

Description

TPLMNG/4/CMDEXECUTESUCC: OID [oid] AS [STRING] successfully executed the command.

The AS successfully executed the command in the delivered profile.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.327.31.5.2.2 Warning qualityOfServiceAlarm(3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
STRING Indicates the AS name.

Impact on the System

None.

Possible Causes

The AS had failed to execute the command and then successfully executed the command.

Procedure

  1. No action is required.

Related Information

None

TPLMNG_1.3.6.1.4.1.2011.5.25.327.31.5.2.3 hwTplmDirectCmdRecoverFail

Description

TPLMNG/3/DIRECTCMDRECOVERFAIL: OID [oid] AS fails to recover configuration of direct-command. (AS Name=[STRING])

Configurations directly delivered to an AS failed to be restored.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.327.31.5.2.3 Minor qualityOfServiceAlarm(3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
AS Name Indicates the AS name.

Impact on the System

If a command fails to be restored, the function configured by this command does not take effect.

Possible Causes

When an AS goes online again, the AS may have different capabilities than those specified in the AS configurations.

Procedure

  1. If a command is not required, undo the command.
  2. If an invalid command is incompatible with the AS capability, undo the command or modify the command settings.
  3. In other cases, collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 4231

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next