No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTMIB

ENTMIB

ENTMIB_1.3.6.1.2.1.47.2.0.1 entConfigChange

Description

ENTMIB/4/TRAP: OID [oid] Entity MIB change.

The MIB information changes because an entity (a board or a subcard) in a device is installed, removed, reset, or registered.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.47.2.0.1 Warning equipmentAlarm(5)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.

Impact on the System

If the board is removed or reset, traffic collection on an interface may be affected, causing incorrect accounting.

Possible Causes

An entity on a device is installed, removed, reset, or registered.

Procedure

  1. This alarm results in generation of other alarms.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 3514

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next