No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R013C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SCMTRAP

SCMTRAP

SCMTRAP_1.3.6.1.4.1.2011.5.25.334.2.1.1 hwSrvServiceExceedThreshould

Description

SCMTRAP/4/SRVRESEXCEED: OID [oid] The service configurations on the device exceed the recommended threshold, which may result in CPU overload. Delete redundant services. (Service ID=[INTEGER], Service Description="[OCTET]", Recommended Threshold=[ULONG])

The service configuration on the device has exceeded the recommended threshold, and the CPU may be overloaded. It is recommended that you delete unnecessary configuration.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.334.2.1.1 Warning qualityOfServiceAlarm (3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
Service ID Indicates the ID of the service.
Service Description Indicates description of the service.
Recommended Threshold Indicates the recommended configuration threshold for the service. The threshold cannot be changed.

Impact on the System

The system CPU may be overloaded, affecting running of services on the device.

Possible Causes

Cause 1: The number of IGMP snooping queriers configured on the device exceeds the recommended threshold (Service Description="IGMP snooping querier").

Cause 2: The number of user VLANs bound to a multicast VLAN exceeds the recommended threshold (Service Description="multicast user VLAN").

Cause 3: The number of user VLANs bound to a multicast VLAN on an interface exceeds the recommended threshold (Service Description="interface-based multicast user VLAN").

Cause 4: The number of interfaces configured with storm control exceeds the recommended threshold (Service Description="storm control interface").

Cause 5: The number of interfaces configured with sFlow exceeds the recommended threshold (Service Description="sFlow sampling interface").

Cause 6: The number of interfaces configured with GVRP exceeds the recommended threshold (Service Description="GVRP interface").

Cause 7: The total limit on the number of MAC addresses configured for port security on interfaces exceeds the recommended threshold (Service Description="port security MAC address").

Cause 8: The number of interfaces configured with DLDP exceeds the recommended threshold (Service Description="DLDP interface").

Procedure

  • Cause 1: The number of IGMP snooping queriers configured on the device exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 2: The number of user VLANs bound to a multicast VLAN exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 3: The number of user VLANs bound to a multicast VLAN on an interface exceeds the recommended threshold.

    When this situation occurs for the first time, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 4: The number of interfaces configured with storm control exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 5: The number of interfaces configured with sFlow exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 6: The number of interfaces configured with GVRP exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 7: The total limit on the number of MAC addresses configured for port security on interfaces exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

  • Cause 8: The number of interfaces configured with DLDP exceeds the recommended threshold.

    When this situation occurs, the device generates an alarm message to notify you that the configuration exceeds the recommended threshold. Determine whether to modify the current configuration according to actual service requirements.

SCMTRAP_1.3.6.1.4.1.2011.5.25.334.2.1.2 hwSrvServiceExceedThreshouldResume

Description

SCMTRAP/4/SRVRESRESUME: OID [oid] The service configurations on the device fall below the restore threshold. (Service ID=[INTEGER], Service Description="[OCTET]", Recommended Threshold=[ULONG])

The service configuration on the device has restored within the recommended threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.334.2.1.2 Warning qualityOfServiceAlarm (3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
Service ID Indicates the ID of the service.
Service Description Indicates description of the service.
Recommended Threshold Indicates the recommended configuration threshold for the service.

Impact on the System

None.

Possible Causes

The service configuration on the device has restored within the recommended threshold.

Procedure

  • This alarm is informational and no action is required.

SCMTRAP_1.3.6.1.4.1.2011.5.25.334.2.1.3 hwSrvServiceConfigFailed

Description

SCMTRAP/3/SRVSERCONFIGFAILED: OID [oid] The service configurations on the device failed because of no enough resources or hash conflict, please undo it. (Service ID=[INTEGER], Service Description="[OCTET]", Service Fail Description="[OCTET]")

The service configurations failed because resources were insufficient or a hash conflict occurred.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.334.2.1.3 Minor qualityOfServiceAlarm (3)

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
Service ID Indicates the service ID.
Service Description Indicates service description.
Service Fail Description Indicates service failure description.

Impact on the System

The configurations do not take effect and services are unavailable.

Possible Causes

Resources were insufficient or a hash conflict occurred when services were being configured.

Procedure

  • Obtain information about the service configurations that fail to be delivered according to Service Fail Description and delete the corresponding service configuration commands.

    • If the service configurations are required, collect alarm information and configuration information, and then contact technical support personnel.
    • If the service configurations are not required, the alarm handing ends.

Related Information

None

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065855

Views: 4415

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next