No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

S9300, S9300E, and S9300X V200R013C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a VE Interface

Configuring a VE Interface

Context

You can use VE interfaces when other link layer protocols need to be carried by the Ethernet protocol.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-ethernet ve-number

    A VE interface is created and the VE interface view is displayed.

  3. Configure a VE interface based on actual requirements.

    • Configure the VE interface to work in Layer 2 mode.

      Run portswitch

      The working mode of the VE interface is changed from Layer 3 mode to Layer 2 mode.

      By default, a VE interface works in Layer 3 mode.

    • Configure a VE sub-interface.

      You need to create a VE sub-interface when configuring an L2VPN to access to an L3VPN.

      1. Run ve-group ve-group-id { l2-terminate | l3-access }

        A Layer 2 or Layer 3 VE interface is created.

      2. Run quit

        Return to the system view.

      3. Run interface virtual-ethernet ve-number.subnumber

        A VE sub-interface is created and the VE sub-interface view is displayed.

Verifying the Configuration

  • Run the display interface virtual-ethernet [ ve-number | main ] command to check the status and statistics of the VE interface.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065861

Views: 5981

Downloads: 11

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next