No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Interface Management

S9300, S9300E, and S9300X V200R013C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Interface Statistics

Clearing Interface Statistics


To monitor the status of an Ethernet interface or locate faults on the interface, collect traffic statistics on the interface. Before collecting traffic statistics on an Ethernet interface within a period, clear the existing traffic statistics on this interface.

Traffic statistics cannot be restored after being cleared. Confirm your operation before clearing them.


  • Run the reset counters interface [ interface-type [ interface-number ] ] command to clear statistics on a specified interface.
  • Run the reset counters if-mib interface [ interface-type [ interface-number ] ] command to clear interface traffic statistics displayed on the NMS.
  • Run the reset statistics-peak interface interface-type interface-number command to clear peak rate statistics on an interface.
  • Run the reset virtual-cable-test { interface-type interface-number | all } command to clear virtual cable test results on an interface.
Updated: 2019-04-09

Document ID: EDOC1100065861

Views: 6641

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next