No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Interface Management

S9300, S9300E, and S9300X V200R013C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing Brief Information About Ethernet Interfaces

Viewing Brief Information About Ethernet Interfaces


During interface troubleshooting, you can view brief information about Ethernet interfaces, including the physical status, auto-negotiation mode, duplex mode, rate, and average inbound and outbound bandwidth usage of interfaces within the latest period of time. The information helps you locate and rectify interface faults.

To prevent existing traffic statistics from affecting fault cause analysis, you can run the reset counters interface [ interface-type [ interface-number ] ] command to clear traffic statistics on an interface, and then view brief information about Ethernet interfaces.


  • Run the display interface ethernet brief [ main ] command to view brief information about Ethernet interfaces.
Updated: 2019-04-09

Document ID: EDOC1100065861

Views: 6730

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next