No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Interface Management

S9300, S9300E, and S9300X V200R013C00

This document describes the interface management configuration, including basic interface configuration, Ethernet interface configuration, and logical interface configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Logical Interfaces

Licensing Requirements and Limitations for Logical Interfaces

Involved Network Element

Other network elements are not required.

Licensing Requirements

A logical interface is a basic feature of a switch and is not under license control.

Version Requirements

Table 3-1  Products and versions supporting logical interfaces

Product

Product Model

Version Supporting Different Types of Interfaces

S9300

S9303, S9306, S9312

  • Ethernet sub-interfaces:

    V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008 (C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • Eth-Trunk/Tunnel interfaces/VLANIF interfaces/Loopback interfaces:

    V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • Null interfaces:

    V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008 (C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • NVE interfaces/VBDIF interfaces/VE interfaces:

    V200R011C10, V200R012C00, V200R013C00

NOTE:

Only the E series, X series, F series, and SC series cards support Ethernet sub-interfaces.

S9300

S9310

  • Ethernet sub-interfaces/Eth-Trunk/Tunnel interfaces/VLANIF interfaces/Loopback interfaces/Null interfaces:

    V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • NVE interfaces/VBDIF interfaces/VE interfaces:

    V200R011C10, V200R012C00, V200R013C00

NOTE:

Only the E series, X series, F series, and SC series cards support Ethernet sub-interfaces.

S9300X

S9310X

  • Ethernet sub-interfaces/Eth-Trunk/Tunnel interfaces/VLANIF interfaces/Loopback interfaces/Null interfaces:

    V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • NVE interfaces/VBDIF interfaces/VE interfaces:

    V200R011C10, V200R012C00, V200R013C00

NOTE:

Only the E series, X series, F series, and SC series cards support Ethernet sub-interfaces.

S9300E

S9303E, S9306E, S9312E

  • Ethernet sub-interfaces/Eth-Trunk/Tunnel interfaces/VLANIF interfaces/Loopback interfaces/Null interfaces:

    V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

  • NVE interfaces/VBDIF interfaces:

    Not supported in any version

  • VE interfaces:

    V200R011C10, V200R012C00, V200R013C00

NOTE:

Only the E series, X series, F series, and SC series cards support Ethernet sub-interfaces.

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • For Layer 2 interfaces, only hybrid and trunk interfaces support Ethernet sub-interface configuration. After a Layer 2 interface is switched to a Layer 3 interface using the undo portswitch command, the interface supports Layer 3 Ethernet sub-interface configuration.
  • After an interface is added to an Eth-Trunk, you can only configure sub-interfaces on the Eth-Trunk, but not on the interface.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065861

Views: 4946

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next