No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of BFD Association

Application of BFD Association

Applications Associated with BFD

Association between BFD and other protocols improves protocol switching performance and reduces service traffic loss. BFD can be associated with protocols such as routing, MPLS, and VPN.

Table 2-8  Association between BFD and routing
Function Link

BFD for IPv4 static routes

See Configuring Static BFD for IPv4 Static Routes in "Static Route Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for IPv6 static routes

See Configuring Static BFD for IPv6 Static Routes in "Static Route Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for RIP

See Configuring BFD for RIP in "RIP Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for OSPF

See Configuring BFD for OSPF in "OSPF Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for OSPFv3

See Configuring BFD for OSPFv3 in "OSPFv3 Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for OSPF IP FRR

See (Optional) Binding OSPF IP FRR and BFD in "OSPF Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for IS-IS

See Configuring Static BFD for IS-IS and Configuring Dynamic BFD for IS-IS in "IPv4 IS-IS Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for IPv6 IS-IS

See Configuring Dynamic BFD for IPv6 IS-IS in "IPv6 IS-IS Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.

BFD for BGP

See Configuring BFD for BGP in "BGP Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Unicast Routing.
Table 2-9  BFD for MPLS/VPN
Function Link

BFD for MPLS LDP

See Configuring Static BFD to Detect an LDP LSP and Configuring Dynamic BFD for LDP LSPs in "MPLS LDP Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - MPLS.

BFD for MPLS TE

See Configuring Dynamic BFD for RSVP, Configuring Static BFD for CR-LSPs, Configuring Dynamic BFD for CR-LSPs, and Configuring Static BFD for TE Tunnels in "MPLS TE Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - MPLS.

BFD for PWs

See Configuring Static BFD for PWs and Configuring Dynamic BFD for PWs in "PWE3 Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - VPN.

BFD for VSI PWs

See (Optional) Configuring BFD for VSI PWs in "VPLS Configurationn" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - VPN.
Table 2-10  Association between BFD and other functions
Function Link

Association between the BFD session status and the interface status

See Configuring Association Between the BFD Session and the Interface Status.

Association between the BFD session status and the interface status (the interface is triggered to go Down)

See Configuring Association Between a BFD Session and an Interface to Trigger the Associated Interface in Down State.

Association between BFD modules

See Configuring Association Between BFD Sessions.

Association between the BFD session status and the card status

See Configuring Association Between BFD and a Card.

BFD for VRRP

See Configuring Association Between VRRP and BFD to Implement a Rapid Active/Standby Switchover and Configuring Association Between VRRP and Peer BFD to Implement a Rapid Active/Standby Switchover.

BFD for VRRP6

See Configuring Association Between VRRP6 and BFD to Implement a Rapid Active/Standby Switchover.

BFD for EFM

See Configuring Association Between EFM and BFD.

BFD for PIM

See Configuring PIM BFD in "IPv4 PIM Configuration" in the S9300, S9300E, and S9300X V200R013C00 Configuration Guide - IP Multicast.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065868

Views: 16808

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next