No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Smart Link and Monitor Link

Licensing Requirements and Limitations for Smart Link and Monitor Link

Involved Network Elements

Other network elements are required to support Smart Link and Monitor Link functions.

Licensing Requirements

Smart Link and Monitor Link are basic features of a switch and are not under license control.

Association between Smart Link and VPLS or VLL can be only used on the device enabled with MPLS. MPLS requires a license. By default, MPLS of a newly purchased device is disabled. To use MPLS, apply for and purchase the license from the equipment supplier.

Version Requirements

Table 6-3  Products and versions supporting Smart Link and Monitor Link
Product Product Model Version

S9300

S9303, S9306, and S9312

V100R002, V100R003, V100R006(C00&C01), V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300

S9310

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300X

S9310X

V200R010C00, V200R011C10, V200R012C00, V200R013C00

S9300E

S9303E, S9306E, and S9312E

V200R001C00, V200R002C00, V200R003C00, V200R005C00SPC300, V200R006C00, V200R007C00, V200R008(C00&C10), V200R009C00, V200R010C00, V200R011C10, V200R012C00, V200R013C00

NOTE:
For details about software mappings, visit Hardware Query Tool and search for the desired product model.

Feature Limitations

  • On the SA series cards , Smart Link cannot be configured to notify the VPLS or VLL module of link switching.

  • On the switch XGE interface connected to the ACU2, LE1D2FW00S01 card, Smart Link cannot be configured to notify the VPLS or VLL module of link switching.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065868

Views: 21722

Downloads: 13

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next