No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a Receiving Device to Ignore Remote Loopback Requests

(Optional) Configuring a Receiving Device to Ignore Remote Loopback Requests

Context

If an interface is in loopback state, the interface loops back all received traffic, causing service interruption and allowing attacks. To solve these problems, configure the local device to ignore remote loopback requests.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run efm loopback ignore-request

    The interface is configured to ignore remote loopback requests.

    By default, the local device processes remote loopback requests.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065868

Views: 15818

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next