No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Priority of BFD Packets

Setting the Priority of BFD Packets

Context

You can change the priority of BFD packets to implement the following functions:

  • Detect whether packets with different priorities on a link can be forwarded.

  • Ensure that BFD packets with a higher priority are forwarded first.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bfd session-name

    The BFD session view is displayed.

  3. Run tos-exp tos-value

    The priority of BFD packets is set.

    By default, the priority of BFD packets is 7, representing the highest priority. The value 0 is the lowest priority.

Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065868

Views: 15941

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next