No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S9300, S9300E, and S9300X V200R013C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, NSR Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, MAC Swap Loopback Configuration, EFM Configuration, CFM Configuration, Y.1731 Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the mVRRP Group Configuration

Verifying the mVRRP Group Configuration

Procedure

  • Run the display vrrp binding admin-vrrp [ interface interface-type1 interface-number1 ] [ vrid virtual-router-id1 ] member-vrrp [ interface interface-type2 interface-number2 ] [ vrid virtual-router-id2 ] command to check bindings between the mVRRP group and VRRP groups.
  • Run the display vrrp admin-vrrp command to check the status of all mVRRP groups.
Translation
Download
Updated: 2019-04-09

Document ID: EDOC1100065868

Views: 21905

Downloads: 13

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next