No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the Configuration File

Restoring the Configuration File

Networking Requirements

As shown in Figure 9-3, a user logs in to the device and finds that some incorrect configurations cause errors in the system. To restore the original configuration, the user transfers the backup configuration file from the TFTP server to the device and specifies this configuration file for next startup.

Figure 9-3  Networking diagram of restoring the configuration file

Configuration Roadmap

The configuration roadmap is as follows:

  1. Restore the backup configuration file on the PC using TFTP.

    Configuration file restoration using TFTP is simple, but there are security risks. In scenarios with high security requirements, configuration file restoration using FTPS, SFTP, or SCP is recommended. The following describes how to restore the configuration file backed up on a PC using TFTP.

  2. Specify the restored configuration file for next startup.


  1. Restore the backup configuration file on the PC using TFTP.
    1. Start the TFTP server program.

      Start the TFTP server program on the PC. Set the path for transmitting the configuration file, and the IP address and port number of the TFTP server.

    2. Transfer the configuration file.

      # Run the tftp command in the user view.

      <HUAWEI> tftp get backup.cfg config.cfg

  2. Specify the restored configuration file for next startup.

    <HUAWEI> startup saved-configuration config.cfg

Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 29605

Downloads: 658

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next