No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Repair a Storage Device Where an Exception Occurred?

How Can I Repair a Storage Device Where an Exception Occurred?

  • Run the dir command to display information about a specified file or directory on the device. If the command output contains unknown, for example, 30,000 KB total (672 KB free, 25,560 KB used, 3,616 KB unknown), run the fixdisk device-name command in the user view to release the unknown space.

    Do not run the fixdisk device-name command if the device is functioning normally.

  • If no file is displayed after you run the dir command, but the storage space is occupied, the following scenario may occur:

    Deleted files are in the recycle bin. Run the dir /all command to display all files, including deleted files that are contained in square brackets []. To restore these deleted files, run the undelete command. To deleted the files in the recycle bin, run the reset recycle-bin command.

  • After you run the fixdisk device-name command, all the files and directories in the specified storage device will be deleted. Exercise caution when determining whether to run these commands because the files and directories cannot be restored after being deleted.
  • The fixdisk device-name command cannot rectify device-level faults.
Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 28712

Downloads: 642

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next