No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
First Login Through the Mini USB Port

First Login Through the Mini USB Port

If no console port is available on your PC, you can use a mini USB cable to connect a USB port on the PC to the mini USB port of a switch that is powered on for the first time.

The device connection method for mini USB port login is different from that for console port login but the communication parameters during login and configurations after login are the same.

NOTE:

Only the S5720HI and S5720EI (excluding the S5720-50X-EI-AC, S5720-50X-EI-DC, S5720-50X-EI-46S-DC, and S5720-50X-EI-46S-AC) support the first login through the mini USB port.

Before You Begin

Ensure the following:

  • The switch is powered on.
  • You have a mini USB cable. (You can use a type-B mini USB cable, which is not delivered with the switch.)
  • The mini USB driver that is compatible with the PC's operating system is installed on the PC.
    NOTE:
    • To obtain the mini USB driver, visit http://support.huawei.com/enterprise and download Switch-MiniUSB-driver.00X.zip in the corresponding path based on the product model and version.

    • The driver file Switch-MiniUSB-driver.00X.zip contains two drivers: 3410-VersX.X.X.X.zip and 1410-VersX.X.X.X.zip, applicable to different devices. (X represents the version number, and a larger value indicates a later version.) Select a proper driver based on the device model before installation

    • The mini USB driver supports only Windows Vista and Windows 7 operating systems.
    • For details on how to install a mini USB driver, see Installation and Uninstallation Guide in the driver file package.

  • The terminal emulation software is installed on the PC.
    NOTE:

    For details on how to use specific terminal emulation software, see the related software user guide or online help. This section uses the third-party software SecureCRT as an example.

Procedure

  1. Use a mini USB cable to connect the USB port on the PC to the mini USB port on the device, as shown in Figure 5-4.

    Figure 5-4  Connecting to the switch through the mini USB port

  2. Start the terminal emulation software on the PC. Create a connection, select the port for connection, and set communication parameters.
    1. Click to establish a connection, as shown in Figure 5-5.

      Figure 5-5  Establishing a connection

    2. View port information in Device Manager in the Windows operating system, select the port for connection, and set communication parameters, as shown in Figure 5-6.

      Communication parameters of the terminal emulation software must be consistent with the default attribute settings of the mini USB user interface on the switch.

      Table 5-2  Default settings for the mini USB port
      Parameter Default Setting
      Baud rate 9600 bit/s
      Flow control None
      Parity None
      Stop bits 1
      Data bits 8
      User name admin
      Password admin@huawei.com
      NOTE:

      Because RTS/CTS is selected in the software by default, you need to deselect RTS/CTS; otherwise, you cannot enter commands.

      Figure 5-6  Setting the port for connection and communication parameters

  3. Click Connect. The following information then will be displayed, prompting you to enter the user name and password. The default user name for the first login is admin and the default password is admin@huawei.com. (The following output is only for reference.)

    Login authentication 
    
    
    Username:admin
    Password:
    Warning: The default password poses security risks.
    The password needs to be changed. Change now? [Y/N]: y
    Please enter old password: 
    Please enter new password: 
    Please confirm new password: 
    The password has been changed successfully
    <HUAWEI>
    • After the first login, you must change the default password. For device security purposes, change the password periodically.
    • The password entered in interactive mode is not displayed on the screen.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 29449

Downloads: 656

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next