No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Comparing Configuration Files

Comparing Configuration Files

Context

You can compare the current configuration file (including offline configurations) with the next startup configuration file to check whether they are consistent and determine whether to set the current configuration file as the next startup configuration file.

The system displays content that differs between the two files starting from the first different character to the end of the file. By default, the system displays 150 characters. If there are fewer than 150 characters of different content, the system displays only the content from the first different character to the end of the file.

If the next startup configuration file is unavailable or empty, the system displays a message indicating that the file cannot be read.

NOTE:

The configuration file name extension must be .cfg or .zip.

Procedure

  • Run compare configuration [ configuration-file ] [ current-line-number save-line-number ]

    The system starts to check whether the current configurations (including offline configurations) are identical with the next startup configuration file or the specified configuration file.

    If parameters are not specified, the configuration files are compared from the first line. The parameters current-line-number and save-line-number are used to continue the comparison, neglecting the differences, after differences are found.

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 29129

Downloads: 651

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next