No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Implementing a Batch Configuration Using the Commander

Example for Implementing a Batch Configuration Using the Commander

Networking Requirements

The enterprise network shown in Figure 3-23 supports the EasyDeploy function. Clients 1 to 3 in office buildings have reachable routes to SwitchA and the file server. The enterprise wants to implement a batch configuration on the clients using the Commander.

Table 3-10 lists information about clients 1 to 3.

Table 3-10  Device information
New Device Device Model Command Script
Client1 S5720-EI

cfg1.bat

Client2 S6720-EI

cfg2.bat

Client3 S6720-EI

cfg2.bat

Figure 3-23  Networking diagram for a batch configuration using the Commander

Configuration Roadmap

The configuration roadmap is as follows:
  1. Load scripts that are made offline to SwitchA.
  2. Deliver commands.

Procedure

  1. Make scripts offline.

    Create a .txt file and edit commands to be delivered in the file. Then, save the file and change the file name extension from .txt to .bat.

    After making the scripts, load them to the Commander.

  2. Deliver commands.

    <HUAWEI> system-view
    [HUAWEI] sysname SwitchA
    [SwitchA] easy-operation
    [SwitchA-easyoperation] execute cfg1.bat to client 1
    Warning: This operation will start the batch command executing process to the cl
    ients. Continue?[Y/N]:y
    Info: This operation will take some seconds, please wait..
    [SwitchA-easyoperation] execute cfg2.bat to client 2 to 3
    Warning: This operation will start the batch command executing process to the cl
    ients. Continue?[Y/N]:y
    Info: This operation will take some seconds, please wait..

  3. Verify the configuration.

    # Check the execution result of batch configuration.

    [SwitchA-easyoperation] display easy-operation batch-cmd result
    This operation will take some seconds, please wait..                                          
    -----------------------------------------------------------                     
      ID   Total  Successful     Failed    Time                                     
    -----------------------------------------------------------                     
      1     50    50             0         2013-09-04  21:45:29                     
      2     30    30             0         2013-09-04  21:55:29
      3     30    30             0         2013-09-04  21:55:29
    -----------------------------------------------------------

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 30021

Downloads: 667

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next