Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deploying Zero Touch Devices Using an Intermediate File
Pre-configuration Tasks
Before deploying zero touch devices using an intermediate file, complete the following tasks:
- Configure routing to ensure that the DHCP server, file server, and devices to be configured (have obtained IP addresses) have reachable routes to each other.
- Collect each zero touch device's MAC address or ESN by viewing the barcode label on the device.
Procedure
Perform the following operations in sequence.
Previous
