No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Basic Configuration

S2720, S5700, and S6720 V200R013C00

This document describes the configurations of Basic, including CLI Overview, EasyDeploy Configuration, USB-based Deployment Configuration, Logging In to a Device for the First Time, CLI Login Configuration, Web System Login Configuration, File Management, Configuring System Startup, BootLoad Menu Operation.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Executing User View Commands in the System View

Executing User View Commands in the System View


Some commands need to be executed in the user view. To execute these commands, you need to exit from the system view to the user view and then execute the commands. In order to ease command execution, you can use the run command to execute user view commands directly in the system view.


  1. Run system-view

    The system view is displayed.

  2. Run run command-line

    The user view command is executed.

    The parameter command-line is a user view command. You must enter the complete command manually because automatic command line completion is not supported.

Updated: 2019-04-04

Document ID: EDOC1100066063

Views: 29640

Downloads: 660

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next