No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Enhanced Stacking Functions

Configuring Enhanced Stacking Functions

Table 3-7 describes the enhanced stack configurations. All these operations are optional and can be configured in any sequence.
Table 3-7  Enhanced stack configurations
Task Description
Configuring MAD

Multi-active detection (MAD) detects multiple master switches after a stack splits.

The MAD configuration is recommended because it minimizes the impact of a stack split on services.

Configuring a System MAC Address Switching Delay

The system MAC address switching delay prevents traffic interruption during switching of the stack MAC address, and minimizes the impact of switching on services.

Configuring the Reserved VLAN of the Stack

You can change the reserved VLAN of the stack and configure services on the default reserved VLAN.

Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26087

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next