No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting Patches on an AS

Deleting Patches on an AS


If you find errors in the patches loaded on an AS, you need to delete the patches to prevent system operation failures. Alternatively, if non-incremental patches need to be loaded to an AS, you need to delete the existing patches on the AS first. Otherwise, non-incremental patches will fail to be loaded.


  1. Run system-view

    The system view is displayed.

  2. Run uni-mng

    The uni-mng view is displayed.

  3. Run patch delete as { all | name patch-name | name-include string }

    The patches on the specified online AS are deleted.

Verifying the Configuration

  • Run the display uni-mng patch-delete info command to check information about the operation of deleting patches on ASs.

Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26371

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next