No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Fault Management

Overview of Fault Management

Definition

Fault management efficiently manages and reports alarms and events generated on a device in a centralized manner.

Purpose

The network expands and becomes more complex. When a module on a device is faulty, a great number of alarms may be generated on one or more devices. The alarms, however, may be lost due to limited capability of handling alarms on the devices or the NMS. As a result, certain needed alarms cannot be displayed, which inconveniences network management.

To collect valid fault information on the NMS in an efficient way, configure the fault management function to efficiently manage and report alarms in a centralized manner.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26164

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next