No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Stack Status

Monitoring the Stack Status

Procedure

  • Run the display stack command to check information about member switches.
  • Run the display stack peers command to check information about the neighbors of a member switch in the stack.
  • Run the display stack port [ brief | slot slot-id ] command to check information about stack ports.
  • Run the display stack configuration [ slot slot-id ] command to check the stack commands that have been executed in the stack.
  • Run the display stack channel [ all | slot slot-id ] command to check stack link connections and status.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26410

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next