No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R013C00 Configuration Guide - Device Management

This document describes the configurations of Device Management, including device status query, hardware management, Stack, SVF, cloud-based management, PoE, OPS, energy-saving management, information center, fault management, NTP.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Master/Standby Switchover

Master/Standby Switchover

A master/standby switchover occurs in a stack when the master switch restarts or when a user runs the switchover command. Figure 3-20 illustrates how the roles of member switches change after a master/standby switchover.
Figure 3-20  Changes of member switch roles after a master/standby switchover
  1. The previous standby switch becomes the new master switch.
  2. The new master switch selects a standby switch.
  3. The previous master switch restarts and then rejoins the stack as a slave switch.
Updated: 2019-04-20

Document ID: EDOC1100066159

Views: 26020

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next